Do not tamper timber unless necessary. If the varnish layer on the surface was thinned, it shows cracks or scratched by these affected areas, the floor can absorb moisture from the atmosphere and can swell. In high traffic areas, the floor starts to show signs of wear after 6-8 years. If the lake is still in an acceptable state, scraping floors may be limited to a slight grinding of the entire surface to remove superficial patina, followed by refreshing coat of paint.
If damage is greater floorboards must be reinforced and then move to remove the old layer of varnish by floor sanding Dublin. This is done with an electric scraped using coarse paper (24 or 36). Switching to a finer polishing floors 50-60 with fine grit sandpaper. To narrow spaces (corners, radiators, etc.) use a small car called car edges.
Parquet floor sanding is an operation aimed hardwood flooring or laminate. This operation removes a layer of worn, scratched or damaged. After scraping operation follows grouting floors. This operation is necessary to mask the unsightly appearance of the joints between the parquet elements. Then the floor is varnished. Lakes used can have different properties gloss: glossy, matte or semi-matte. The lake is considered semi-matte or satin is sometimes called silk.
For solid flooring is recommended that after grinding to be varnished as soon as possible so that excess moisture in the atmosphere is not absorbed by it. Apply the first coat of varnish and expects strengthening its minimum 12 hours. Sand, aspirate and clean, then apply a new coat of varnish. Each kind of wood requires a certain type of finish.
Dublin floor sanding may incur while many operations like this, without losing its qualities.
For scraping and varnishing surgery it is recommended to seek specialists who will perform quality work, with professional equipment and performance.