8 Sanding Mistakes That Could Ruin Your Floors
We are in a day and age where everyone is into DIY projects. From DIY plumbing to DIY basic home repairs, there is no denying the fact that these projects can be quite satisfying.
However, not all home improvement projects are great candidates for do-it-yourself attempts. Floor sanding in particular is one of those things that is truly best left to the professionals to avoid causing irreparable damage. For some perspective, here are some of the most common DIY mistakes that could cost you your floor’s structural integrity or even its aesthetic appeal.
8 common rookie mistakes
- Sanding floors that don’t need it
Not all floors actually need to be sanded. Determining if and when to do it is something that only experienced flooring experts can do. This is based on a number of factors from the type of material to its age.
Sanding a floor that does not need sanding will not directly damage the floor. However, it will significantly reduce the floors overall durability. It is like literally shaving years off your floor’s life.
- Using the wrong equipment for the wrong floors
This is probably the biggest sin and the most common rookie mistake when it comes to DIY floor sanding. What many homeowners realize is that there are very many different floor sanding devices with different abilities and different purposes.
Some are good for hardwood while others are ideal for softer flooring materials. Some are designed for early sanding steps while others are meant for final, smooth sanding before finishing products.
Using the wrong sander at the wrong time could leave you with poor results or even damage your floor.
- Uneven sanding
Uneven sanding is another common mistake that homeowners make when DIY floor sanding. The process can be quite tiresome taking up to 5 hours or even more for professionals. As an inexperienced individual, it will inevitably take longer to do the job. There is also the fact that you will have to do it alone.
This often leads to inadequate sanding out of exhaustion more than anything else. The uneven sanding will ruin the aesthetic of your floor. Unfortunately, not even the best quality or the best-applied finishing products will salvage the situation.
- Inappropriate sandpaper grit matching
There are 3 main grit categories when it comes to floor sanding. Coarse sandpaper has a grit of about 40 to 80. This is ideal for initial sanding to remove polish layers. The medium grit on the other hand is ideal for evening out the sanding from the initial coarse sanding. Finally, there are he fine sand grit sandpaper options including 180 to 230 grit. This is ideal for finishing up and polishing before or in between layers of finishing products.
Using the wrong grit at the wrong time will ruin your results. It will also ruin the sandpaper in the case of the medium and fine options therefore wasting your money.
- Overusing the sanding paper
Another rookie mistake when DIY floor sanding is using old and overused sandpaper. The stuff may feel rough to touch at fast but it is not invincible. With a few uses, the coarseness reduces due to friction and so does its effectiveness. There may also be a lot of buildup of sanding debris which further hurts its overall functionality.
You will end up using a lot of your energy and effectively getting nowhere.
- Edge neglect
Unfortunately, this is one of those mistakes you will almost inevitably make when DIY floor sanding whether or not you consider yourself a rookie. Getting to the edges and properly sanding them is about combining experience, skill, and the appropriate equipment.
If you are doing it yourself, chances are that you lack most if not all of the components required to get the job done right. Edges that are left inadequately sanded will stick out like a sore thumb and may just require redoing.
Applying finishing products is one of the most important parts of effective floor sanding. It keeps the surface protected and allows the results to shine through nicely though a glossy, protective film.
However, this is not always as easy as it may seem and could end up nullifying all your efforts. Maybe you chose the wrong finishing product to complement your specific type of floor. It could also be that you didn’t apply it properly and you end up with everything from stuck debris to bubbles and bumps.
- Inadequate personal protection
Finally, a common rookie mistake made during floor sanding is failure to wear adequate protective equipment. This may not necessarily damage your floor but it is also not any food for you to expose yourself to.
Unfortunately for DIY enthusiasts, renting or even buying the protective equipment may end up being more expensive than hiring a crew or at least unreasonably so.
Clearly, a lot could go wrong as a result of inexperienced, DIY tackling of floor handling sanding projects. It is truly best to just leave it to the professionals. They not only know how to deal with differing flooring materials but also what equipment to use and how to perform the sanding itself.
The most important thing is that you find a floor sanding business that is actually good at the job. Here are a few of the most important features of a good floor sanding business.
- Vast experience in floor sanding and flooring in general.
- Access to high tech floor sanding equipment.
- Competitive but affordable rates.
- A track record of good quality work and professionalism.
- Fantastic customer care.
Once you have found a good crew to work with, you can spare both yourself and your floor the trouble of having to deal with the blowback of rookie DIY floor sanding mistakes. In fact, going with professional floor sanding teams may actually end up saving you more than doing it yourself as you do not have to pay for repairs or to get the job redone.
Just use our list of desirable features to identify the best floor sanding business near you and reach out to get the job done right.