Google
google-site-verification: googleaf2fdc8a2a22b50f.html
Floor sanding, hard parquet sanding services in Dublin
Statcounter

diy floor sanding

10 Signs That Your Floor Is Desperate For Restoration

Floor Sanding In Process

Floor Before Sanding

 

Floor Sanding Job Done

Pine Floor After Sanding

 

10 Signs That Your Floor Is Desperate For Restoration 

1. Loose floor boards
More often than not, you will hear these before you see them. Loose floor boards are caused by very many different reasons. These include water damage, foundation problems, improper installation and simple succumbing to wear and tear. In some cases, the situation is so bad that the boards or panels actually detach and lift from the subfloor. This is what is referred to as buckling. Whatever the case, the looseness needs to be corrected in order to ensure protection of your home’s residents and the floor itself.

2. Cracked or broken panels, tiles or blocks
These breakages may either be on the units themselves or between the units as with wood panelling. This is usually as a result of continuous stress or sudden high impact forces as seen when a heavy object falls to the floor. This problem also needs to be fixed quickly as the cracks may worsen exposing potentially harmful sharp edges and splinters.

3. Chipped paint
This is a simple problem that is equally simple to fix. It is common with concrete and ceramic tile flooring. More often than not, fixing this is for aesthetics but this does not in any way make it any less of a problem.

4. Panel cupping
This is a phenomenon that occurs on wood, vinyl and laminate floor panels where the edges appear elevated in relation to the centre portions. This is usually as a result of water damage. However, it may also be due to excess weight application on the centre portions of the panel. It is important to get this fixed as soon as possible in order to prevent cracking and breaking.

5. Panel crowning
Crowning on the other hand involves elevation of the centre part of the wood, vinyl or laminate panel. Unlike cupping, this is cause by water damage or improper installation. However, prompt restoration is just as important here as it is with cupping.

6. Surface irregularities
These include dents, scratches and in some cases, full blown indoor portholes. If you see any of these in your home, it just might mean that it is about time you reached out to your trusty floor sanding professional buddies.

7. Faded polish patches
It takes decades for floor polish to wear out and fade into unsightly patches. This happens a lot faster if the room experiences a lot of foot traffic. When these patches start to appear, it is usually a sign that your floor is long overdue for a floor sanding and recoating appointment.

8. Mould, mildew and other fungal growths
Fungus is one of the key signs of water damage to your floor. In addition to being completely unsightly, these growths can pose a significant health risk to you and those living with you. It is therefore important to consider scheduling a floor sanding and restoration assessment in order to learn the best way forward.

9. Stubborn stains
Stains are truly every homeowner’s worst nightmare. Somehow, they have the ability to draw attention away from the pristine beauty around the room however small they are. You may have to call a floor sanding professional to deal with this mess.

10. Exposed nails
Exposed nails are a sign of one of two things both necessitating immediate restoration. The first is worn out panels that need to be replaced. The second is unstable panels that may be buckling, cupping or crowning. Either way, it is important to get an expert on it right away before the situation gets out of hand and your pet, child or even you get injured.

 

Floor Sanding Dublin

The Importance Of Hiring Professional Floor Sanding Experts

Quality Water Based Finishes

New Floor Sanding & Varnishing Project

 

 

The Importance Of Hiring Professional Floor Sanding Experts 

We live in a day and age where do it yourself projects are all the rage. Floor servicing has not been left behind either. However, the importance of working with professionals could not be emphasized enough. We could go on and on about the disadvantages and risks associated with DIY floor sanding. However, it is important to first understand the benefits and many perks you have to look forward to working with experts. Below are seven of these that should highlight just how much better it is to work with the pros.

7 Benefits Of Working With The Pros

1. They know what they are doing
Professionals in the floor sanding business are usually trained in their craft. This means that they know exactly what they are doing as they work on your floor. Their intensive training and experience ensures that whether it is simple sanding or full floor restoration, the floor will be handled as it should be.
2. They will get the job done a lot faster
With professional floor service crews, you can also rest assured that you will get to enjoy the results a lot faster. These projects usually take a lot of time. It is especially worse when it is being done by someone who is either not trained or is inexperienced. This can be a huge inconvenience especially if the work is being done in your home. With the professionals, it will be done as soon as possible allowing you to enjoy your space in no time.

3. They are appropriately equipped to handle the task
Floor sanding and restoration is very technical and requires very specific equipment. Professionals have fully stocked arsenals and are without a doubt the best equipped to work on your floors. Whether it is the latest high tech sander or a high precision device for applying floor finishing, you can rest assured that they have all they need to give you what you paid for.
4. They have a better understanding of the different materials used in flooring
Working with different flooring materials can be a daunting task to the inexperienced. How you handle tile is not how you handle wood panels. How you handle concrete is not how you handle laminate. Professionals understand this and know exactly how to work with whatever you have to ensure high quality results.

5. They are more experienced and therefore better suited to handle unforeseen challenges
With floor sanding as with most other projects, things do not always go as planned. This is where working with the pros comes in handy. Their experience is a major asset as it allows them to navigate through these challenges in ways that no guide book or DIY guideline article would let you.

6. You are assured of great results
With all their skills, experience and high tech equipment, you should expect nothing but the very best in terms of results.

7. It saves you a lot of time and effort
Finally, working with professionals saves you time and effort. All you have to do is find the right crew, explain your expectations and sit back and relax and your floor gets its much needed face lift.

Conclusion
With the 7 benefits to look forward to above, it goes without saying that going professional is the best move in floor sanding. Not only do you get to enjoy great results and speedy finishes but also convenience and a little down time for your enjoyment. In a nutshell, you can never go wrong working with professionals on floor sanding and other related services. All you need to do is to ensure that you get the best business for you needs.

 

 

Floor Sanding Company Dublin

The Homeowner’s Guide To The Professional Floor Sanding Process

 

We Restore Old Staircases

Professional Staircase Sanding And Staining

 

The Homeowner’s Guide To The Professional Floor Sanding Process 

One of the most important things for you as a client in a floor sanding project is to stay informed. Knowing what is happening and when it is happening is a great way to ensure that you get full value for your money. Below is a comprehensive guide to the entire process. It involves description of the main steps involved in the entire project from the initial meeting to you getting back to your normal routine. That way, you should have a great idea of exactly what to expect from your crew in terms of timeline and sequence of events.
Steps Involved In Floor Sanding
• Step 1- Initial assessment
Once you have identified the need for servicing and you have settled on the right business for you, the first step is usually the initial assessment. Here, the professional inspects the floor in order to identify damaged areas. During this step is where the decision of what needs to be done is made. It is also where you as the client get an idea of how much it will cost you to get all the work done.
• Step 2- Planning
Planning involves coming up with a structured timeline that the crew will use during the entire project. This is especially important when there is a large work space involved. It is also important as it allows you to get organised in order to avoid any inconvenience. It also involves the team identifying and gathering all the equipment they will need for the project.
• Step 3- Work site preparation
One of the most important activities during this part of the project is cleaning the room. This is where you remove all the furniture and carpeting if there is any. More often than not, the crew handles this. However, there are some that might require you to make your own arrangements. It is also here that the professionals get their tools and all their equipment ready for the task ahead.
• Step 4- Floor servicing and restoration
The term floor servicing is general and refers to basically whatever service you are receiving from the floor sanding professionals. It is here where the experts get down and dirty whether it involves simple sanding and varnishing or fully ripping out the floor for replacement. It goes without saying that this is usually the longest part of the entire project and may take anywhere between a few hours and several weeks.
• Step 5- Application of finishing and other sealants
Despite the differences in the floor restoration step, most services end with the finishing step. This is where the floor is cleaned, varnished and sealed. This is done to ensure that it is not only aesthetically appealing but also that the results last for a very long time.
• Step 6- Work site clearance
The project may be messy, and it is important for the crew to ensure that they clear up all the debris. This is usually done after the finishing step but there are some who prefer to do it before. Whatever the case, you as the client should ensure that the crew does their part. The last thing you want is to be left with unsightly debris raining on your parade.
• Step 7- Final assessment
Final assessment involves inspecting the floor to ensure that the restoration and the finishing are both flawless. After this step, the professional will usually give you an estimate of the amount of time you need to give the surface to settle before moving all your furniture and accessories back in. By the end of this step, you should have your floor perfect and ready for you to use and show off.

 

 

Floor Sanding Dublin

Give Your Floor A New Lease Of Life

 

Floor Sanding In Process

Floor Before Sanding

 

Give Your Floor A New Lease Of Life

Hardwood floors blend with any type of décor, from traditional and modern, to casual and dramatic. You only need to select the wood species, and surface finishes that meet your particular taste. From the heavy grained Red Oak, the harder White Oak with its grey undertones, Maple flooring with its straight lines or curly patterns, or even those rare cuts that have distinctive pattern of small marks which resemble tiny eyes, to American Cherry whose colours vary from board to board, the golden brown Birch, or the richly coloured Walnut, you’re spoilt for choice. The elegance of the wood actually enhances the value of the property. There is more demand by buyers and tenants for residential and commercial space in which wood floors have been installed. This makes it easier to generate leads and seal deals, making higher profits in the process. The nature of the wood also makes it easy to clean. Since it doesn’t attract dust, debris and other particles, or latch onto the ones that eventually end up on it, the vacuuming and cleaning process is a breeze. Wood is so durable, that if properly maintained can last for over a hundred years. In fact, there are numerous buildings around the world where their floor installations have been gleaming longer than their countries have celebrated independence. In addition to the cleaning, the maintenance process also involves floor sanding and refinishing, to restore the beauty and strength to the surface.
Common DIY Floor Sanding Mistakes
Going the DIY route with floor sanding is risky. This ranges from making tiny mistakes that become glaring blemishes in the finish, to ruining the floor with extensive damage that may end up requiring you to replace the boards. This is in addition to high amount of time and energy you’ll have spent on the task. There are different factors to consider during the operations, all of which need to blend together to avoid disaster. The machinery has to be high quality, capable of delivering the power needed to sand through to the bare wood. One needs to start off with low-grit sand paper, and work up to the high-grits to ensure the surface remains smooth. How the machinery is manoeuvred across the surface is key. If it’s not moved at a steady pace, dips and ridges could from. Faulty equipment, whether it vibrates too much or is it out of tune, can result in issues such as chatter marks and edger divots. Even the turning on or off of the machine while the sanding belt is in contact with the floor surface will damage it. Concentrating too much on one area because it has imperfections such as being uneven, will cause you to take too much off the floor, digging deeper into the wood. Dust generated also needs to be efficiently vacuumed off. Unfortunately the vacuums that come with the floor sanding equipment for hire usually don’t have the capacity of ensuring sufficient removal of the particles. Some will wind up on the different surfaces in the interior space, and those fine ones will float around in the air space- and inhaling them will irritate the respiratory system. This not only leaves you with a huge cleaning chore, but the dust that is left behind on the floor will cause blemishes on the new finish that is to be applied. These mistakes, plus the accompanying inconveniences and frustrations, can be avoided by calling in the floor sanding experts to take care of the job for you.
Floor Sanding Job Done

Pine Floor After Sanding

Floor Sanding Done Professionally

Floor Sanding In Process

Floor Before Sanding

 

 

Floor Sanding Done Professionally

There’s nothing quite like that warmth and cosy feel that wood floors bring to the interior space. It’s a natural elegance that accentuates the décor, making it vibrant and inviting. There are numerous wood species to choose from, each coming with their colourations and grain patterns, and you can also have your unique mode of installing the floor boards. This ensures that you get to set up the ambience that appeals to your particular taste. The aesthetic appeal of the wood floors have made them highly sought out after. In fact, those in the real estate industry vouch for establishments with wooden floors selling faster and easier compared to retail office or residential spaces with other types of flooring. It’s no longer a preserve of the wealthy- with the diverse options and production methods, there are wood floors that are available to all budgets. There’s also the ease of maintenance. When it comes to wood cleaning, the process is not a hustle. With its non-electromagnetic nature, this means that soiling, dust and other particles are not attracted to the surface, and there are no grout lines to accumulate in, or fibers to hold onto the grime. Hence, the sweeping, vacuuming and mopping is made easier. This also makes it a healthy flooring choice, since you won’t have allergens accumulating in the interior space. Unlike other flooring types, when you want to give it a fresh new look, you can simply refinish instead of replacing it. That’s where floor sanding comes in.
Reasons To Rely On Floor Sanding Specialists
Our floor sanding crew come on site with high efficiency machinery, that is designed to grind through to the bare wood with ease, getting rid of the existing finish and exposing the underlying wood. The pores are opened up to enable them to receive the wood stains, primer coats and lacquers that are to be applied. This allows them to form a strong bond with the structure, to both provide protection and enhance its beauty. With all that sanding that is taking place, you don’t want your furnishings, valuables and even the electrical units around the house getting coated in dust. The particles can lead to damage of the affected components, and not to mention add a huge cleaning chore to your list of concerns. Our dustless floor sanding systems take care of that. Hoses connect the sanders to high-powered vacuum systems, sucking up the coarse and fine particles as soon as they are formed, preventing them from covering your items or escaping into the air space. This makes the process cleaner and healthier. After all, you don’t want your family members at home, or the customers and employees in your business premises, inhaling the toxic and carcinogenic particles in the sanding dust.
In order to ensure that you are satisfied with the full range of our operations, our floor sanding crew are both professional and courteous. They will arrive at your premises on the scheduled time, and answer any questions that you may have about the operations. What’s more, the services are cost friendly to both residential and commercial clients. The pricing structure has been formulated to suit your individual needs, factoring in aspects such as the type of wood being sanded, the current condition of the floor, all through to the area size.

 

Floor Sanding Dublin

 

 

 

Floor Sanding Job Done

Pine Floor After Sanding