Google
google-site-verification: googleaf2fdc8a2a22b50f.html
Floor sanding, hard parquet sanding services in Dublin
Statcounter

cheap floor sanding

How Often Should I Refinish My Wood Floor?

 

How Often Should I Sand My Floors?

 

Permanent floor finishes have not yet been invented so you will have to refinish your floors regularly. Regularly can mean different things for different people. A commercial floor with a lot of traffic will have to be refinished much more often than a domestic floor with normal domestic traffic.

 

Even if the wood floor is not subjected to a lot of traffic, the finish on the floor will change colour and look a bit tired after few years. There are a few factors which can make your wooden floors look more worn out and jaded than they should be.

 

a.            Wrong cleaning products

b.            A lot of direct sunlight

c.             A lot of heavy traffic

d.            Too much water

e.            Pets

 

  1. Wrong Cleaning Products – using a high PH (acidic) floor cleaner can permanently damage the shine of your floors and can make a brand new floor look old. Bleach based floor cleaners can have the same dulling effect.
  2. A lot of sunlight – direct exposure to the sunlight will change the colour of your floors in a matter of days. Having a rug on the floor will also stain your floor in a funny way. The floor will brighten up in the area left uncovered and it will stay unchanged in the area under the rug.
  3. A lot of heavy traffic – a wood floor will look perfect after being refinished. It will be fully protected and ready for use. But any type of floor finish, one pack or two packs has a limited life expectancy. If you have a few hundred or thousand people walking on the wood floor daily it will reduce the periods between floor refinishing. The traffic will bring a lot of negative things to your floors. First the friction itself will wear off your floor. Then the dirt from shoes will attack the finish on your floors. Plus more cleaning and maintenance will be required.
  4. Too much water – entrance hallway floors which are used by people walking in and out of a property will damage quicker. All the water from the rain will be brought onto your floors. It is just a matter of time before the floor finish cracks and water saturation damage appears. Also, mopping the floor with too much water is one of the main reasons for wood damage.
  5. Pets – dogs are wood floors number 1 enemy. Especially small, energetic dogs. A pet is likely to be full of energy and most pets have sharp nails even if most pet owners keep the pet nails short. Excited pets will run and sleep on wood floor. All this energetic fun will scratch the finish of the floor and will create spaces for water to penetrate the floor. Watermarks will appear and the floor will look stained.

 

Here are some of the most common reasons why a floor needs to be refinished. There are high traffic water based floor varnishes that are designed to take a lot of use and abuse but all will eventually wear off. A floor sanding company needs to be contacted once in a while (every 3 years) to assess the wood floor. Even if the floor looks clean, a trained eye will be able to see imperfections and issues, if there are any issues.

 

Wood floors have to be refinished regularly. Waxed wood floors should be refreshed every 6 months. Refreshing a waxed floor is a pretty easy operation and no training is required. Floors that are finished with a varnish can also be refreshed or sealed with a water based wood floor polish. Solid wood floors are designed to last for a lifetime if properly maintained.

 

Have a look under the heaters, around the kitchen area, at door entrances etc. to see if you notice black spots on your floors. Black spots are a sign of water damage and you need to act fast to sort it out and prevent further damage. There are many floor sanding companies in Dublin that would love to help you out. Bear in mind, it is cheaper to prevent than repair.

 

*** most floors have to be refinished every 5 years. If there is a lot of traffic, the periods between floor refinishing is reducing by 50%***

When It’s Time To Rejuvenate Your Floor

Quality Floor Sanding Services

Floor Sanding & Gap Filling

 
When It’s Time To Rejuvenate Your Floor 

Causes of wood floor damage are diverse. For instance, one may accidentally use the wrong cleaning solutions when working to remove the stubborn dirt and grime- such as oil soaps silicone-based products, ammonia, vinegar, or even common household products such as dishwashing detergent and powdered all-purpose cleaners. These may dissolve the soiling, but they end up damaging the finish, and in some cases corrode through to the bare wood. Casters on furniture that are used directly on the wood floor cause isolated wear. Foot traffic affects the surface in two major ways. The first is the dirt and grime that gets grinded against the wood, like miniature pieces of sandpaper that gradually ruin the finish. The second is the actual footwear used. Spiked shoes cause scratches, as do those with hard metal parts. In cases of high heels, the weight of the wearer that reaches the floor is multiplied significantly, due to the reduced surface area through which it is being applied. This increased pressure puts strain of the wood floor, causing it to deteriorate. The higher the numbers of people walking about in your establishment, the greater the rate at which the wearing down occurs. It’s common to observe traffic lanes on those frequently walked on areas, where the colour of the surface is duller compared to the adjacent parts of the floor. This, however, is not how things must remain. After all, you invested heavy in installing the wood floor, and you should be able to enjoy it all through its service life. Simply get floor sanding and restoration services to bring back the elegance to your establishment.

Why DIY Floor Sanding Is More Trouble Than It’s Worth

This comes down to machinery, skills and material costs. The equipment that professional floor sanding companies use is heavy-duty, powerful, and comes with a huge price tag. This ranges from the sanders to break down the tough coats of finish, to the dustless systems that vacuum up even those tiny particles that could have got airborne and inhaled. In contrast, the machines that are hired from rental stores need to be able easily carried in the trunk of family cars and manoeuvred without much hustle to the user. Thus the size is reduced, which cuts into the power needed for the job. Hence, right from the onset, the DIYer is at a disadvantage due to the lower efficiency. It’s worse when you get poorly maintained floor sanding equipment. These can ruin your floor with drum marks and edger divots. A machine that vibrates too much will leave behind chatter marks. When it comes to manoeuvring the floor sanding gear on the surface, mistakes like concentrating on one area can take too much off the affected surface. Even turning the machine on and off while the sanding belt is in contact with the floor can leave behind unsightly marks, which are made more prominent when the finish coats are applied. Costs in getting quality equipment, to aspects like sandpaper with a grit low enough for the initial sanding that won’t clog up with the finish, end up increasing your budget- which bloats up further when there are repairs that need to be made. It can all take a toll on you. Save your time, energy and resources by bringing in the floor sanding experts to handle it all.

Restore The Beauty To Your Floor

Natural Finish

Floor Finished With Water Based Floor Varnish

 

Restore The Beauty To Your Floor 

Is it time to give your wood flooring a fresh start? Has it been worn down due to the effects of everyday use? These range from foot traffic, pet’s claws that leave scratches, all through to the sun’s radiation that causes colour changes to the surface. Are there traffic lanes that have developed on the floor- especially on those frequently used areas? This is caused by the dirt particles that abrade the surface when people walk on them, to the dulling and straining effects caused by the kind of footwear used. Even those light toy cars that the children play with are a threat to the floor, since they can cause scratches during the drag races as they as pushed around. Is the floor dotted with stains that have set into the surface, taking away the glamour of the interior space? Food and drink spills, urine stains from your furry friend, all through to corrosive cleaning agents that damage the surface instead of tackling the dirt and grime- they call cause spots that ruin the appeal of the installation. Even regular cleaning itself causes wear, especially with the constant scrubbing of the surface. Nature also has a role to play. The sun’s radiation, specifically the ultraviolet and infrared rays, affect the surface finish and wood structure itself. While the finish may develop an amber tint, the wood can either darken or bleach- depending on the species that you have installed. There comes a time when you need a fresh new start- to get rid of the old and worn out coats and have a new finish applied to the surface. After all, you don’t want to be stuck with a dull and dilapidated surface. Hire professional floor sanding services to give your installation a new lease of life.

Enhance Your Living And Working Conditions With Floor Sanding And Refinishing

The state of the floor affects your quality of life. You don’t want to be coming home from work to be greeted by a dull and weary interior. Those elegant furniture sets and state-of-the-art electronics won’t be appealing against a backdrop of a worn out and stained floor. Even hosting guests becomes an issue, when you find yourself constantly being put on the defensive, wondering how the state of things reflects on your personality. Getting floor sanding and restoration services will enable you to bring back that lost natural look and feel to the interior space. A similar case applies to business premises, where you want your customers to value your brand, and trust the quality of the products and services that you have to offer. Getting them to make the purchase will be a tall order when they have a low perception of you because of the worn out floor and dingy décor. The floor sanding will give you a fresh start, getting to the bare wood and allowing you to apply the finish treatments that you desire to enhance your décor. There are different stains available for you to choose the colouration you want for your flooring, and the enhanced strength and durability from the varnishes used will protect the underlying wood, preserving its structural integrity. That way you enhance the life of your investment, and get to enjoy it all through.

10 Signs That Your Floor Is Desperate For Restoration

Floor Sanding In Process

Floor Before Sanding

 

Floor Sanding Job Done

Pine Floor After Sanding

 

10 Signs That Your Floor Is Desperate For Restoration 

1. Loose floor boards
More often than not, you will hear these before you see them. Loose floor boards are caused by very many different reasons. These include water damage, foundation problems, improper installation and simple succumbing to wear and tear. In some cases, the situation is so bad that the boards or panels actually detach and lift from the subfloor. This is what is referred to as buckling. Whatever the case, the looseness needs to be corrected in order to ensure protection of your home’s residents and the floor itself.

2. Cracked or broken panels, tiles or blocks
These breakages may either be on the units themselves or between the units as with wood panelling. This is usually as a result of continuous stress or sudden high impact forces as seen when a heavy object falls to the floor. This problem also needs to be fixed quickly as the cracks may worsen exposing potentially harmful sharp edges and splinters.

3. Chipped paint
This is a simple problem that is equally simple to fix. It is common with concrete and ceramic tile flooring. More often than not, fixing this is for aesthetics but this does not in any way make it any less of a problem.

4. Panel cupping
This is a phenomenon that occurs on wood, vinyl and laminate floor panels where the edges appear elevated in relation to the centre portions. This is usually as a result of water damage. However, it may also be due to excess weight application on the centre portions of the panel. It is important to get this fixed as soon as possible in order to prevent cracking and breaking.

5. Panel crowning
Crowning on the other hand involves elevation of the centre part of the wood, vinyl or laminate panel. Unlike cupping, this is cause by water damage or improper installation. However, prompt restoration is just as important here as it is with cupping.

6. Surface irregularities
These include dents, scratches and in some cases, full blown indoor portholes. If you see any of these in your home, it just might mean that it is about time you reached out to your trusty floor sanding professional buddies.

7. Faded polish patches
It takes decades for floor polish to wear out and fade into unsightly patches. This happens a lot faster if the room experiences a lot of foot traffic. When these patches start to appear, it is usually a sign that your floor is long overdue for a floor sanding and recoating appointment.

8. Mould, mildew and other fungal growths
Fungus is one of the key signs of water damage to your floor. In addition to being completely unsightly, these growths can pose a significant health risk to you and those living with you. It is therefore important to consider scheduling a floor sanding and restoration assessment in order to learn the best way forward.

9. Stubborn stains
Stains are truly every homeowner’s worst nightmare. Somehow, they have the ability to draw attention away from the pristine beauty around the room however small they are. You may have to call a floor sanding professional to deal with this mess.

10. Exposed nails
Exposed nails are a sign of one of two things both necessitating immediate restoration. The first is worn out panels that need to be replaced. The second is unstable panels that may be buckling, cupping or crowning. Either way, it is important to get an expert on it right away before the situation gets out of hand and your pet, child or even you get injured.

 

Floor Sanding Dublin

6 Ways To Get Full Value For Your Money With Floor Sanding

Pine Floor Refinished

Old Pine Floor After Staining

Floor Sanding & Clear Floor Varnish

50 Years Old Pine Boards restored

 

 

6 Ways To Get Full Value For Your Money With Floor Sanding

Whether it is your home or your office building that you are getting serviced, there is no denying the importance of high quality floor sanding. When working with professional crews that are good at what they do, you are usually assured great results. However, there is a lot that you as the client can do in order to ensure that this actually happens. Below are 6 tips that should help ensure that you get full value for your money with floor sanding services.
Tips To Help You Make The Most Of Your Investment
1. Take your time searching for the right crew
One of the best ways to participate in the success of your floor sanding service is by ensuring that you get the best crew for the job. This means that you will have to take your time deciding who to work with. In this case, it is important to do some research and figure out what different businesses are offering. It is also important to go through reviews and testimonials from previous clients. This allows you to get a better idea of what to expect.
2. Get different price quotes from different businesses
When it comes to getting full value for your money, one of the most important things is striking a balance between priorities and preferences. With your expectations in mind, what you need to do is to find out what different businesses are charging. Getting a price quote allows you to compare them in order to find the best business for you. Getting a price quote also works in your advantage as it ensures that you are protected from abrupt price switches and unnecessary extra charges.
3. Be present during the project
One mistake that most home and business owners make is leaving the crew all alone during floor sanding projects. It is important to be present every once in a while in order to ensure that things are going as planned. Being present also reduces the risk of you getting ripped off either through low quality work or delayed results.
4. Give the crew some space
As much as it is important to be present, you need to be careful not to hover unnecessarily. Giving the crew their space and time to work ensures that they work without interruption in a comfortable environment. In short, just try to find the perfect balance between being present and absent and you can rest assured that things will be done as you want them.
5. Make your expectations crystal clear
Floor sanding experts are not mind readers and you will therefore have to make your expectations very clear. If you want full value for your money, this is very important as it allows those working on your floor to have a reference point in terms of expected results.
6. Voice out any concerns you may have
It is also very important for you to ask questions and express your concerns during the project if you have any. More often than not, one of the main complaints is that of delays and missed deadlines. As the client, you have every right to voice your concerns and it might just be what is needed to get things going. It is also important to ask for clarification and explanations when you identify any problems in the way the floor sanding is being done. Even though you are not the expert, it is your home and your money and you have every right to be informed.
Conclusion
In a nutshell, it is important for you to understand that the success of the floor sanding project is as much in your hands as it is in those of the crew. With the tips above, you should be able to play your role in a satisfactory manner. Bottom line; whether it is fresh installation on your new commercial building or basic floor restoration on your living room, there is a lot you can do to ensure great results.

 

Floor Sanding Services

Dustless Floor Sanding 101- All You Need To Know

 

Pine Floor Refinished

Old Pine Floor After Staining

 

Dustless Floor Sanding 101- All You Need To Know

 

What Is Dustless Floor Sanding?
One of the biggest challenges that both professionals and home owners face during floor restoration is the huge mess that ensues. With floor sanding, this mess is pretty much inevitable. There are, however, several techniques applied to minimize the inconvenience. One of these is dustless floor sanding.
Dustless floor sanding refers the process of stripping old polish, paint and superficial layers of flooring material with little or no release of rogue dust and debris. Contrary to popular beliefs, dustless sanding does not actually mean that there is no dust produced at all. This is practically impossible as the sanding process basically involves shredding solid material into fine dust particles. It basically means that the dust that is produced is cleared away from the site as soon as it is produced by the sander. Below is more information about this technique in terms of how it is achieved and what you can expect from it; both the good and the bad.
How Dustless Sanding Is Achieved
With dustless floor sanding, the trick is in the immediate cleaning and collection of the dust. Most sanders today feature blowers and a dust collection bag. These ensure that as you sand, the machine collects as much dust as possible. They basically serve both the purpose of sanders and cleaners simultaneously. In spite of the effectiveness of these systems, they are not entirely invincible. This is because there is usually some dirt left on the surface. This is especially the case when working with handheld sanders. In this case, whatever is left behind is usually easily cleared up through conventional vacuum cleaning.
Dustless floor sanding can also be achieved by connecting the sander to vacuuming systems. This takes expertise and loads of capital, since the machinery is expensive, and is usually used as a convenience hack by renowned professionals in the industry. When done right, it is a lot more effective than the reliance on inbuilt dust collection systems on sanders.
Comparison With Sandless Restoration
Both dustless and sandless restoration procedures are meant to reduce or completely eliminate a messy worksite. However, sandless restoration does this by completely eliminating the process of sanding. Here, floors are restored by complete removal and replacement with materials that were prepared offsite. With such techniques in place, it is virtually impossible to encounter sanding dust. But this means that the old finish is still in place- hence the underlying problem is not yet solved.
Pros Of Dustless Sanding
1. It makes cleaning up a lot easier after the restoration project is complete.
2. It is a great technique for health purposes as it caters for crew members and residents with allergies or asthma.
3. Quick site clearance allows those working on the floor to monitor progress as they go.
4. It protects walls, shelves and furniture left in the room from being coated with dust.
Bottom line
It goes without saying that dustless sanding is technology’s gift to floor sanding professionals and their clients. With all the benefits there are to look forward to, it is without a doubt a much better option to older techniques that leave everyone gagging and coughing throughout the project.

 

Floor Sanding Dublin  

Floor Restoration Done Professionally

 

Natural Finish

Floor Finished With Water Based Floor Varnish

 

Floor Restoration Done Professionally

 

 

 

The floor takes a beating on a daily basis. Take for instance the kitchen. It’s a highly trafficked area, with all the moving around and shuffling of feet, plus the occasional tools, utensils and even food getting dropped onto it. Over time, the surface loses its character and appeal, dulls and looks neglected. Scratches and dents, from the living room to the dining rooms at home, and in the lobbies, offices, shopping areas and dance floors, in business and entertainment areas are common. Pets’ claws, plus the dirt and sand that’s tracked into the building and gets grinded against the surface of the floor under people’s shoes, cause the surface to wear down. Those fine rocks, glass pieces, dust that has accumulated on the floor, insect gunk, asphalt from the driveway, are all abrasive, with the friction created having the same effect as sandpaper. Then there are those cases when furniture is getting moved, where dragging gorges out the floor surface. Even having heavy furniture sets without padding underneath puts strain on the surface. High heels and shoes with hard surfaces such as metal parts can easily cause damage to the wood. After some time, the floor will need to be refinished. After all, you don’t want to live or work in an area that’s dilapidated and appears to be crumbing apart. You want that elegance that you loved with the wood floor when you were installing in in the first place to be restored. That can be achieved with a thorough floor sanding, then applying the new coats of treatment that accentuate the surface.
Why DIY Floor Sanding Is Risky
Floor sanding is not just a matter of applying a bit of sandpaper to a floor board like in wood shop class. First, it would take a really long time to do it by hand, so machines are needed. These in turn are heavy gear and, without the right measures being put in place, plenty of damage results. For instance, if you hover on one area for far too long, the floor sanding goes deeper into the wood than expected, leaving behind uneven boards. If you make quick passes, then the coats won’t be adequately removed, which affects the finishes that you will apply. Failure to follow the correct grit sequence- like starting with fine grit sandpaper such as 100 or 120g, due to fear of removing too much wood, then the floor sanding won’t be effective. Without the new finish being able to bond properly with the bare wood, the results will be below par. Moreover, without the expertise to handle the equipment, one can end up spending hours on the task drawing out the process, yet it is the first step of the restoration job. Then there’s the sheer amounts of dust generated. It ends up covering your furniture, appliances and fine particles are suspended in the air, from where they can be inhaled, leading to a wide assortment of respiratory complications. All this can be avoided by turning to the floor sanding professionals. They come with state-of-the-art dustless systems that get the job done fast without dirtying the place, providing quality results that prepare the floor to receive the new surface treatment and finish coats.

7 Reasons Why DIY Floor Restoration May Not Be The Best Idea

Quality Staircase Sanding Services

Pine Staircase Before Sanding

7 Reasons Why DIY Floor Restoration May Not Be The Best Idea 

If you are one of those people who do not mind getting their hands dirty, then you have probably at some point or other considering taking up do-it-yourself floor sanding. As fun as the project may seem, you can rest assured that it is not going to be easy. Unlike many other home projects, floor sanding and restoration is heavily skill and equipment based. This makes it a lot more difficult as a DIY task. Below are 7 reasons why doing it yourself is not a good idea.
7 Cons Of Doing It Yourself
1. The quality of results will not be of professional levels
If you choose to take on the task of repairing your floor by yourself, you can rest assured that you will not get professional level results. This is because with floor sanding and restoration, skill and experience are the secrets to success. Unlike other DIY project, no amount of online research will equip you with all the information you need to get high quality results. At the end of the day, you save money you would have spent on a professional but end up with unsatisfactory results.
2. You might not be able to identify all the trouble spots on the floor
One of the most important steps in floor sanding and restoration is inspection. This allows the professional to identify the problems and come up with the appropriate game plan. When working on it as an inexperienced individual, you are likely to miss some of these trouble spots. In the long run, failure to solve the unidentified problems negates all your hard work and necessitates a complete repeat of the project.
3. It is expensive
Floor sanding is one of those projects where DIY is more expensive than hiring a professional. The process involves many different tools and products that you will have to purchase yourself. The worst part is that most if not all of these items are only applicable in floor restoration and will therefore not be useful after you are done. If on the other hand you chose to hire the equipment needed, you will still end up spending a lot of money.
4. It requires equipment and tools that are hard to come by
In addition to being expensive, equipment and tools used in these projects are not easily accessible. This will either force you to improvise leading to poor results or to use your time and effort to find them which is inconvenient.
5. There is a huge risk of physical injury
These projects also very dangerous with some of the tools used posing serious injury risks. One of the most common causes of injuries with floor restoration is improper handling of sanding equipment. This could lead to anything from simple bruising to serious cuts and lacerations. There is also a major risk from injury by nails and other broken pieces of debris encountered during the project.
6. You might end up causing more damage
This almost always happens when people take up floor restoration as a DIY project. When professionals do it, there is always a risk of damage to the floor including scratches, swirls and varnish blotching. With inexperienced individuals, this risk is increased significantly and the mistakes are usually a lot less subtle and a lot more difficult to correct.
7. It is time consuming
Finally, DIY floor sanding will take up a lot of your time and effort. This is a major inconvenience whether you have a job or your schedule is a lot more flexible. It is especially frustrating when you keep running into challenges during the project. It is even worse when after all the time spent you end up with horrible results.
Bottom line
After all is said and done, there is no denying the fact that DIY floor sanding is not a great idea. With all the risks and inconvenience involved, it goes without saying that you are better off working with a professional crew. That way, you can be sure that you will get amazing results, in the shortest time possible and with the least risk of doing more harm than good.

 

 

Local Floor Sanding Services In Dublin

 

 

Dustless Floor Sanding

Sanding & Varnishing Stair Case

How Often Should I Sand My Floors?

 

Parquet Floor Restored

Quality Dustless Floor Sanding & Varnishing

 

Time To Sand Your Floor? We’re Here For You 

Wood floors are always under attack. People walking about, kids with their car toy races and miniature train tracks on the floor, pets that dig their sharp claws into the surface as they run about in order to gain traction, the sun’s radiation that bakes the floor causing the finishing to develop a yellow tint, and the wood to darken or get bleached out, all through to the occasional food and drink spills that end up staining the surface. Footfall is a major factor, seeing that traffic lanes usually develop in areas that are frequented, such as the entryways and exits of the establishment, the area outside the elevator, laundry rooms, office corridors, the employee lounge, attendant’s’ counters, etc. The dirt and grit under the shoes abrades the wood surface, and the weight of the people puts strain on the floor- especially when high heels and involved. Shoes with hard metal parts, or damaged heels for that matter, can chisel out the wood. Heavy sets of furniture that are placed without pads can dent the surface. Then there are those cases when, during the move or one is simply rearranging items in the interior space, the furniture gets dragged instead of being lifted. This scratches the surface. Harsh chemicals products used for the cleaning, such as vinegar, and ammonia, plus all-purpose cleaners and dish washing detergents also damage the flooring. Whether the wear is intentional or accidental, you don’t want your floor to remain in that state. It doesn’t have to. Simply get it restored with a thorough floor sanding and refinishing.

Pitfalls Of The DIY Floor Sanding Process
DIYers encounter various problems when taking on the floor restoration project. For starters the professional-grade floor sanding equipment is not easily available for rent, due to the logistics and expenses involved in handling it. Hence with the lower-efficiency machines that are hired, one already starts off at a disadvantage. This is from the power needed to break through the finish coats, to the vacuuming up of the dust that is generated during the floor sanding. Issues like denting and chattering are common with the resultant surface. The low-grit sandpaper that is used for the initial sanding is a rare commodity in local dealer stores. The higher grit sandpapers are meant for smoothening out the surface. Starting with them clogs them up with finish, and there’s the frustration of drawing out the process and still ending up with patches of finish that are not removed. These spots will be magnified by the new coats that are to be applied. Discrepancies such as divots will also become prominent. You don’t want to spend all that time and resources, and end up with unsatisfactory results that can only be remedied by getting the floor sanded again. This increases the inconvenience to the occupants in your establishment since during all that period the area will likely to have be sealed off. You can prevent things from taking this trajectory by getting floor sanding professionals to take care of the project from the start. Coming with high-powered machinery and dustless sanding systems, you get to have a thorough job done in moments, allowing the rest of the finishing process be carried out without a hitch.

Properties Of Water-Based Finishes That Make Them A Hit In Floor Sanding And Restoration

 

Floor Sanding Dublin

Affordable Floor Sanding Services

 

Properties Of Water-Based Finishes That Make Them A Hit In Floor Sanding And Restoration 

 

 

Finishing is one of the most important parts of any floor sanding and restoration process. It doesn’t really matter how well the project was done; if the finishing isn’t right then it was all for nothing. As a client, it is important for you to understand the different types of finishes available. This should help you settle for what you want in order to ensure that you get high quality results. Among the most popular types of finishing products are the water-based finishes.
Properties Of Water-Based Floor Finishes
Floor finishes are designed to serve as the top coat after all the floor sanding and other restoration activities are complete. It offers both aesthetic and functional benefits ensuring that the floor looks good and remains protected from damage for a long time. There are basically two forms of floor finishes. Water-based finishes, as the name suggests, contain polyurethane mixed with water and other compounds meant to protect the floor surface. Below are a few of their key properties.
1. The finishing effect is very mild and clear
Most people who opt for the water-based finishing products do so for this characteristic final look. The finishing adds a soft touch of cleanliness and perfection without taking away from the beauty around the room. It is perfect for use where you as the home owner want the floor to blend seamlessly with the rest of your interior décor.
2. They take the colour of the flooring material on which they are applied
Whether it is hard or softwood, water-based finishes take up the colour of the flooring material onto which they are applied.
3. They are odourless
Another great property of these floor finishing products is the fact that they are odourless. This comes in especially handy when there are individuals living in the house who are particularly sensitive to harsh fumes.
4. They dry very quickly
These water-based finishes are also widely appreciated for their ability to dry quickly. Finishing products are the main reason why you are advised to keep off a room after its floors have been restored. With the water-based options, you do not have to wait several hours or even days to be able to settle back in.
5. Enhanced wear resistance and abradability attributes
Finishes are meant to ensure protection of the surface after floor sanding. Durability is therefore a major priority. Water-based options are very strong and highly durable ensuring that your floor gets to enjoy the protection for a long time.
6. They require several coats for the same effects as oil based finishes
The composition of water-based finishes makes it a thin mixture. In order to achieve the right consistency and coverage over the floor surface, those working on your floor will have to apply several coats.
Conclusion
Having understood the different properties of water-based finishes, it is not so difficult to see why they are so popular. In order to enjoy more long-term results from this finishes, it is advisable to apply additional coats once or twice a year. This should be done by a professional in order

 

Properties Of Water-Based Finishes That Make Them A Hit In Floor Sanding And Restoration