With the passage of time, the floor is scratched and begins to lose its luster or color. Do not worry, there are signs that it should be changed. There are signs that needs floor sanding services. Period then be refinished parquet depends on the traffic to which it is subject and the lake which was finished last time.
Floor sanding Dublin services will start by freeing room will be refinished. To this end it will remove the furniture in the room. The next step consists in removing the skirting or ceiling (as appropriate). It is recommended to replace them with new ones because the passage of time and their removal will definitely affect their quality. We execute and we recommend using polishing machines sander abrasive belt; operation is performed in three successive phases, using abrasive grain with increasingly smoother ones. After these operations move to the grouting operation, an operation that is performed with a resin bond.
Walker lacquering operation will apply a good primer component coating and fast drying wood fiber that strengthens and protects it from contact with water or other liquids. After this step follows the actual varnishing. It is most common method that can be used. It will be finished by brush or roller coating designed to prevent air bubbles in general. In 2 coats of lacquer and each layer before next, we expect the lake to dry and harden; sanding between coats is done with abrasive grit 180-220. Between different types of lake opt for the polyurethane. Dublin floor sanding offers the highest abrasion resistance; in some cases we use water-based paint or organic floor finishes,
Remember, you cannot change the type of finish. If when it was installed, the floor was finished with varnish, to refinish all be finished with varnish.